All moulded components are manufactured in Plastimo's Lorient workshop, using high pressure
injection techniques. This engineering process gives the composite material properties that are
comparable to certain metals, while remaining totally impervious to corrosion, therefore virtually
maintenance free.
The s series of headsail gears are extremely easy to install and take down. It requires no unstepping
of the mast and no modification of the forestay, thanks to a patented design which allows quick and
easy installation directly on the tensioned forestay.
The inner PVC liner is clipped onto the forestay and the aluminium spar slides easily over the PVC liner.
The risk of tearing sails at junctions is therefore much reduced.
406 S : for boats from 4 to 6 m ~ 14 to 20 ft. The 406 S features all the advantages of a large headsail
reefing system : Delrin twin ball bearing races in both drum and halyard swivel.
All components are manufactured from polyarylamide.
Available in either Chainplates mounting or turnbuckle mounting.
If you have a bottle screw on your forestay, then choose the Turnbuckle version
Fitting Instructions
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
