The SeaCover is ideal to cover and protect your boat against rain, dust and sun when you don t use it. It combines high construction standards with high quality materials. Made from extra strong PA coated Nylon 300D for maximum water resistance, it features an elastic cord all around for ideal fit and double stitched seams for long lasting use. Additionally, it has non ~scratching aluminium D ~rings for extra hull protection. The SeaCover can be used in fishing or recreational boats, inflatable or motorboats, with or without cockpit and rails. It is available in silver colour and in 4 sizes depending on the dimensions of the boat.
Available in 4 sizes:
Size 1: Length cm 427 ~488 Width cm 180 Colour Silver
Size 2: Length cm 427 ~488 Width cm 229 Colour Silver
Size 3: Length cm 488 ~564 Width cm 239 Colour Silver
Size 4: Length cm 518 ~579 Width cm 244 Colour Silver
Installation Instructions Use a cloth or sponge to cover all sharp areas such as corners and edges in order to avoid tearing the cover
Drape the cover over the entire boat, starting at the bow
Pull the cover over the rub rail around the entire boat
Starting from the bow, tie one end of the nylon rope supplied with your boat cover to the O ~ring that is located at the bottom hem of your cover
Then pass the rope from the next O ~ring and continue as such with all the O ~rings around the boat
When you finish fasten with a knot the two ends of the nylon rope
Choosing one of the O ~rings located in the middle of one boat's side, tie there one end of the black stretching cord supplied with your boat cover and the other to the trailer
Do the same with the second stretching cord on the other side of the boat