Product Highlights
- The Cub Cadet XT1 LT 42 is powered by a Kohler single cylinder 541 cc engine
- 42-inch stamped, 13-gauge, twin-blade deck with 12 cutting positions.
- Equipped with an optimized steering system for responsive handling to give a 16-inch turn radius a zero-turn feel.
- 3-year/no hour limit warranty (includes powertrain) and 5-year chassis and front axle unlimited hours.
- Ideal for mowing up to 1.5 acres of mostly flat terrain and a few obstacles.
- Tuff Torq foot controlled hydrostatic transmission, no shifting - just push the pedal and go
Product Specifications
Engine
- Engine Brand: Kohler®
- Engine Model: 5400 Series
- Engine Model Number: KS595
- Engine Displacement: 541cc
- Engine Output: 19.5HP
- Starter Type: Electric
- Fuel Tank Capacity: 3.0 gal. US (11.36 L)
- Cylinders: Single
- Engine Start: Ignition Key
- Engine Oil Capacity: 2.0 qt. US (1.89 L)
- Lubrication: Fully pressurized
- Charging System12 amp regulated
- Fuel Gauge: No
- Governor: Mechanical
- Choke: Choke-a-matic
- Air Filter: Dual element
- Oil Filter: Yes
- Fuel Delivery: Carburetor
Battery
- Battery: 230 CCA
- Battery Type: AGM (Absorbent Glass Mat)
- Battery Voltage: 12V
Drive System
- Transmission: Tuff Torq® TL-200
- Forward Speed: 5.5 MPH / 8.6 km/h
- Reverse Speed: 3 MPH / 4.8 km/h
- Rear Axle: 3/4"
- Drive System: Hydrostatic
- Transmission Control: Foot Pedal
- Transmission Housing: Aluminum
- Rear Differential Lock: No
Cutting Deck
- Deck Cutting Width: 42 in
- Deck Wash: Yes
- Deck Material: 13-gauge steel
- Deck Engagement (PTO): Manual
- Deck Construction: Stamped
- Blade(s): Two
- Deck Lift: Manual
- Cutting Height Range: 1" - 4"
- Anti-Scalping: Two gauge wheels
- Deck Positions: 12
Warranty
- Warranty: 3-year unlimited hours
- Frame Warranty: 5-year unlimited hours
- Front Axle Warranty: 5-year unlimited hours
- Deck Shell Warranty: 3-year unlimited hours
- Commercial Warranty: No
Chassis
- Frame: Robotically welded
- Turning Radius: 16"
- Bumper: No
- Rear Tow Hitch: Yes
- Corrosion ProtectionY: es
- Front Pivot Bar: Cast iron
Controls
- Cruise Control: Yes
- Brakes: Disc
Comfort
- Seat Type: 15" high-back
- Armrests: No
- Seat Adjustment: Lever
- Floor Mats: Rubber
Wheels
- Bearing Type: Poly Bushing
- Rear Tires: 20"x 8"-8"
- Front Tires: 15"x 6"-6"
- Tire Tread: Turf Saver
Additional Specifications
- Mulch Kit: Available Separately
- Headlight(s): Dual-LED
- Cup Holder: Yes
- Operator Presence System: Yes
- Model Number: 13AKA9TSA10
Specifications
- Series: XT1® Enduro Series™
Specifications Disclaimer: Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
![POLYFORM U.S. Polyform NF 4 Heavy Duty Twin Eye Fender 6.4" X 21.6" White [NF 4 WHITE]](https://cdn.shopify.com/s/files/1/0405/8454/4408/products/62079XL.jpg "POLYFORM U.S. Polyform NF 4 Heavy Duty Twin Eye Fender 6.4\" X 21.6\" White [NF 4 WHITE]")
![POLYFORM U.S. Polyform Swivel Connector 7/8" 1" Rail [TFR 402]](https://cdn.shopify.com/s/files/1/0405/8454/4408/products/93999XL.jpg "POLYFORM U.S. Polyform Swivel Connector 7/8\" 1\" Rail [TFR 402]")
![POLYFORM U.S. Polyform True Fit Fender Holder 12" Diameter [TFR 280]](https://cdn.shopify.com/s/files/1/0405/8454/4408/products/93998XL.jpg "POLYFORM U.S. Polyform True Fit Fender Holder 12\" Diameter [TFR 280]")
![POLYFORM U.S. Polyform True Fit 2 Fender Holder Kit 12" Diameter [TFR 280 2]](https://cdn.shopify.com/s/files/1/0405/8454/4408/products/94031XL.jpg "POLYFORM U.S. Polyform True Fit 2 Fender Holder Kit 12\" Diameter [TFR 280 2]")
![POLYFORM U.S. Polyform True Fit Fender Holder 9" Diameter [TFR 230]](https://cdn.shopify.com/s/files/1/0405/8454/4408/products/93997XL.jpg "POLYFORM U.S. Polyform True Fit Fender Holder 9\" Diameter [TFR 230]")
