SK30005VH Hot Water Pressure Washer 3000/5.0 479cc The SK Series is a truly versatile machine. It can be trailer / truck mounted and is a real asset when electricity is not available. The industrial rated 479cc Vanguard twin-cylinder electric-start engine provides power to the pump and 12 VDC burner. The Stainless Steel wrapped 1/2" SCH 80 coil heats the water up to 250F. You will experience extended run times with the large 8.0 gallon gas and diesel tanks. An industrial rated belt-drive pump turns at lower RPM resulting in a cooler running and longer lasting pump compared to one that is direct drive. The machine is complete with gun/wand and 50' hose, quick connect nozzles, adjustable thermostat, pressure relief valve, burst disc and flow sensitive unloader. Requires group 24 550 CCA battery, not included T185TWH 200 Gallon Tank Skid This 200 gallon Tank Skid is fitted with a Hot-Water Briggs & Stratton-Powered SK30005VH Wash Skid. It couldn't be easier...Buy this complete Wash Skid Package, bolt it to your trailer or slide it in a full-sized truck bed and go to work. The 12-gauge powder coated frame includes a pre-plumbed seamless polyethylene water tank. Futures: SK30005VH Hot Water Pressure Washer 3000 PSI / 5.0 GPM, Low RPM belt-drive triplex pump Commercial Rated V-Twin Electric-Start 479cc Engine Large 8-Gallon Fuel Tanks for Extended Run Time Requires G24 550CCA Battery (Not Included) Adj Thermostat, up to 250F Wet Steam Electric / Diesel Fired Gas Engine / Diesel Fired 50-State CARB Compliant Includes 2) Stainless Steel Hose Reels, 100' Garden Hose and a 50' High Pressure Hose 1-1/2" 180 Micron Filter 1-1/2" Quick Drain Valve T185TWH 200G Tank Skid Fits in the Bed of Most Pickup Trucks, Load & Go Tank skid package easily mounts into your truck or existing flatbed trailer with 4 bolts Pre-plumbed, no hassle sourcing a pressure washer, tank and reels