Husqvarna 365

Description
Sizes
Care

Product Highlights

Professional 71cc chainsaw with fuel-efficient engine

Husqvarna 365 is a saw for typical professional use. It has been developed in close cooperation with professional users working in the most demanding conditions. The low weight and high power are combined with a rugged engine, making this saw exceptionally versatile and suited for a wide variety of applications.
The X-TORQ engine gives you a much more environmentally friendly saw with radically lower exhaust emission level and fuel consumption

Specifications

Engine	20" Bar, .3/8" Pitch, .058" Gauge SKU: 966 42 86‑20	20" RSN 3/8" 1,3 mm C83 SKU: 966 42 86‑21	24" RSN 3/8" 1,5 mm C85 SKU: 966 42 86‑23	28" RSN 3/8" 1,3 mm C83 SKU: 966 42 86‑24	28" RSN 3/8" 1,5 mm C85 SKU: 966 42 86‑25	24" Bar, .3/8" Pitch, .050" Gauge SKU: 966 42 86‑94
Chain speed at max power	74.5 fts	74.5 fts	74.5 fts	74.5 fts	74.5 fts	74.5 fts
Cylinder displacement	70.7 cm³	70.7 cm³	70.7 cm³	70.7 cm³	70.7 cm³	70.7 cm³
Output shaft power¹	4.9 hp	4.9 hp	4.9 hp	4.9 hp	4.9 hp	4.9 hp
Torque, max.	3.8 Nm	3.8 Nm	3.8 Nm	3.8 Nm	3.8 Nm	3.8 Nm
Torque, max. at rpm	6,600 rpm	6,600 rpm	6,600 rpm	6,600 rpm	6,600 rpm	6,600 rpm
Clutch engagement speed (±120)	3,500 rpm	3,500 rpm	3,500 rpm	3,500 rpm	3,500 rpm	3,500 rpm
Electrode gap	0.02 in	0.02 in	0.02 in	0.02 in	0.02 in	0.02 in
Idling speed	2,700 rpm	2,700 rpm	2,700 rpm	2,700 rpm	2,700 rpm	2,700 rpm
Ignition module air gap	0.01 in	0.01 in	0.01 in	0.01 in	0.01 in	0.01 in
Maximum power speed	10,200 rpm	10,200 rpm	10,200 rpm	10,200 rpm	10,200 rpm	10,200 rpm
Oil pump capacity, max	20 ml/min	20 ml/min	20 ml/min	20 ml/min	20 ml/min	20 ml/min
Oil pump capacity, min	4 ml/min	4 ml/min	4 ml/min	4 ml/min	4 ml/min	4 ml/min
Oil pump type	Adjustable flow, no flow at idle	Adjustable flow, no flow at idle	Adjustable flow, no flow at idle	Adjustable flow, no flow at idle	Adjustable flow, no flow at idle	Adjustable flow, no flow at idle
Spark Plug	Champion RCJ7Y, NGK BPMR7A	Champion RCJ7Y, NGK BPMR7A	Champion RCJ7Y, NGK BPMR7A	Champion RCJ7Y, NGK BPMR7A	Champion RCJ7Y, NGK BPMR7A	Champion RCJ7Y, NGK BPMR7A
Equipment
Recommended bar length, min	16 in	16 in	16 in	16 in	16 in	16 in
Pitch	3/8"	3/8"	3/8"	3/8"	3/8"	3/8"
Recommended bar length, max	28 in	28 in	28 in	28 in	28 in	28 in
Chain type	H42	C83	H42	C83	H42	C83
Bar length	50 cm	50 cm	60 cm	70 cm	70 cm	60 cm
Bar length (inch)	20 in	20 in	24 in	28 in	28 in	24 in
Sprocket type	Rim 7	Rim 7	Rim 7	Rim 7	Rim 7	Rim 7
Gauge	.058"	.050"	.058"	.050"	.058"	.050"
Dimensions
Weight (excl. cutting equipment)	14.1 lbs	14.1 lbs	14.1 lbs	14.1 lbs	14.1 lbs	14.1 lbs
Sound and noise
Sound pressure level at operators ear	110 dB(A)	110 dB(A)	110 dB(A)	110 dB(A)	110 dB(A)	110 dB(A)
Sound power level, guaranteed (LWA)	119 dB(A)	119 dB(A)	119 dB(A)	119 dB(A)	119 dB(A)	119 dB(A)
Sound power level, measured	118 dB(A)	118 dB(A)	118 dB(A)	118 dB(A)	118 dB(A)	118 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle	8 m/s²	8 m/s²	8 m/s²	8 m/s²	8 m/s²	8 m/s²
Equivalent vibration level (ahv, eq) front handle	5.7 m/s²	5.7 m/s²	5.7 m/s²	5.7 m/s²	5.7 m/s²	5.7 m/s²
Lubricant
Oil tank volume	0.89 US pint	0.89 US pint	0.89 US pint	0.89 US pint	0.89 US pint	0.89 US pint
Lubricant type (Engine)	Husqvarna 2 stroke or equiv. at 50:1	Husqvarna 2 stroke or equiv. at 50:1	Husqvarna 2 stroke or equiv. at 50:1	Husqvarna 2 stroke or equiv. at 50:1	Husqvarna 2 stroke or equiv. at 50:1	Husqvarna 2 stroke or equiv. at 50:1
Emission
Exhaust emissions (CO₂ EU V)²	747 g/kWh	747 g/kWh	747 g/kWh	747 g/kWh	747 g/kWh	747 g/kWh

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.

What do our certifications mean?

Click each logo to learn more!