Product Highlights
440
Enjoy power without compromising performance with the Husqvarna 440. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And LowVib® technology makes this saw comfortable to use, even in demanding conditions.
SpecificationsÂ
| Engine |
18" .325", 1,3 mm, H30, SN,FA saw RTLBx
SKU: 970 61 23‑38
|
| Chain speed at max power | 56.76 fts |
|---|---|
| Cylinder displacement | 40.9 cm³ |
|
Output shaft power1Â
|
2.4 hp |
| Torque, max. | 2.16 Nm |
| Torque, max. at rpm | 6,300 rpm |
| Clutch engagement speed (±120) | 4,300 rpm |
| Electrode gap | 0.02 in |
| Idling speed | 2,900 rpm |
| Ignition module air gap | 0.01 in |
| Maximum power speed | 9,000 rpm |
| Oil pump type | Fixed flow |
| Equipment | |
| Recommended bar length, min | 13 in |
| Pitch | .325" |
| Recommended bar length, max | 18 in |
| Chain type | H30 |
| Bar length | 45 cm |
| Bar length (inch) | 18 in |
| Sprocket type | Spur 7 |
| Gauge | .050" |
| Dimensions | |
| Weight (excl. cutting equipment) | 9.78 lbs |
| Sound and noise | |
| Sound pressure level at operators ear | 102 dB(A) |
| Sound power level, guaranteed (LWA) | 114 dB(A) |
| Sound power level, measured | 112 dB(A) |
| Vibration | |
| Equivalent vibration level (ahv, eq) rear handle | 4.2 m/s² |
| Equivalent vibration level (ahv, eq) front handle | 3.8 m/s² |
| Lubricant | |
| Oil tank volume | 0.53 US pint |
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
| Emission | |
|
Exhaust emissions (COâ‚‚ EU V)2Â
|
813 g/kWh |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
