Product Description
Harken High-Load Ball & Socket Base
Stand-up bases allow a wide variety of blocks to be held upright, swivel freely, or pivot so lines have a fairlead under load. The ball-and-socket design lets blocks articulate up to 45 degrees and swivel freely. The 460 and 461 bases (high-load versions of the 010 and 029) have stainless steel reinforcement plates to handle the high load capacities of 57 mm and 75 mm Carbo blocks.
Specifications:
Height: 1 3/4 in. (44 mm)
Weight: 4 oz. (113 g)
Fasteners: #10 FH in. (5 FH mm)
Base Ø: 2 1/8 in. (54 mm)
Inside socket Ø: 3/8 in. (10 mm)
Pin Ø: 3/16 in. (5 mm)
Max. working load: 800 lbs. (363 kg)
Breaking load: 2500 lbs. (1134 kg)
Use with blocks: 57 mm carbo
Stand-up bases allow a wide variety of blocks to be held upright, swivel freely, or pivot so lines have a fairlead under load. The ball-and-socket design lets blocks articulate up to 45 degrees and swivel freely. The 460 and 461 bases (high-load versions of the 010 and 029) have stainless steel reinforcement plates to handle the high load capacities of 57 mm and 75 mm Carbo blocks.
Specifications:
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
