Designed for multiple engine applications with limited transom space. The contoured blade design allows extra space for engines to turn while reducing cavitation to the props. Boat lengths 16' (4.9m) to 40' (12.2m).
Dual actuators are for larger, faster boats - boat lengths 24' (7.3m) to 52' (15.8m).
Supplied with heavy duty hinge with 3/8" (9.5mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on s/steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5mm) stainless steel mounting bolts. 3.75" (9.5cm) sacrificial anodes installed.
HP Trim Tab Kits include:
2 x 7-gauge 304 S/S electro-polished blades
2 or 4 x (Single or Dual) XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors
2 or 4 x Actuator extension harnesses to be purchased separately
Lenco owner's/installation manual
| Part No. | Actuator | L x W | Boat Length | Min Transom Height |
| 4-46574 | Single | 14" x 12" | 16' - 32' | 10.5" (26.7cm) |
| 4-46575 | Single | 18" x 12" | 20' - 40' | 10.5" (26.7cm) |
| 4-46576 | Double | 21" x 14" | 24' - 42' | 10.5" (26.7cm) |
| 4-46577 | Double | 25" x 14" | 28' - 46' | 10.5" (26.7cm) |
| 4-46595 | Double | 29" x 14" | 30' - 52' | 10.5" (26.7cm) |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
