Product Description
Harken Small Boat Cruising Furling System
Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.
Specifications:
Pin-to-pin length: 4 in. (102 mm)
Drum Ø: 4 3/16 in. (106 mm)
Maximum Line Ø: 1/4 in. (6 mm)
Jaw width: 3/8 in. (10 mm)
Max. luff wire Ø: 3/16 in. (5 mm)
Clevis pin Ø: 5/16 in. (7.9 mm)
Weight: 22.8 oz. (646 g)
Max. working load: 2000 lbs. (907 kg)
Boat length - monohull: 20-25 ft. (6.1-7.6 m)
Boat length - multihull: 18-23 ft. (5.5-7 m)
Includes: Drum (208) and upper swivel (207)
Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.
Specifications:
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
