The TSUNAMI Mk2 manual bilge pump is ultra powerful and easy to install. It features a patented impeller that eliminates air~locks in the system, so that the pump will not run dry and burn out.
It also has an integrated non~return check valve to prevent water from running back into the bilge.
The pump has been innovatively designed for simple system maintenance.
There's no need to dismantle the plumbing or mounting feet. The pump can be inspected and, if necessary, cleaned via a practical snap lock.
Operating voltage 12 V
Recommended fuse 3 A
Max. flow rate 28 l/min
Float switch Optional
Hose connection 19.0, 25.4 mm
Length 86 mm
Width 91 mm
Height 93 mm
It also has an integrated non~return check valve to prevent water from running back into the bilge.
The pump has been innovatively designed for simple system maintenance.
There's no need to dismantle the plumbing or mounting feet. The pump can be inspected and, if necessary, cleaned via a practical snap lock.
Operating voltage 12 V
Recommended fuse 3 A
Max. flow rate 28 l/min
Float switch Optional
Hose connection 19.0, 25.4 mm
Length 86 mm
Width 91 mm
Height 93 mm
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
