Elevate your hunting experience with the Leapers UTG-PRO 30mm High Picatinny Mount Rings. Proudly designed and made in the USA, these rings boast a high profile P.O.I® (Precision Optics Interface) with a 37mm center height, perfect for optics with a 30mm tube and up to a 73mm outer objective. The innovative P.O.I® ensures a seamless ring-to-scope interaction, secure zero hold, and eliminates recoil movement. Crafted from durable 6061-T6 aluminum alloy and 4605 steel, these rings are both lightweight and robust, fitting seamlessly on Mil-spec 1913 Picatinny rail platforms.
- Proudly Designed and Made in USA
- High Profile P.O.I® (Precision Optics Interface) Rings Have a 37mm Center Height to Fit Optics with a 30mm Tube, and up to a 73mm Outer Objective
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings -
- Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with and Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
Leapers UTG-PRO 30mm High Picatinny Mount Rings Features:
- Proudly Designed and Made in USA
- High Profile P.O.I® (Precision Optics Interface) Rings: Have a 37mm Center Height to Fit Optics with a 30mm Tube, and up to a 73mm Outer Objective
- The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings:
- Progressively Machined: for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate: Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with and Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop: Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
- 2 Piece Ring Set: Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
- Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
- Machined from 6061-T6 Aluminum Alloy and 4605 Steel: with Matte Black Hard Coat Anodize
- UTG PRO® Original Snag-free Contoured Profile: with Reduced Weight and Size
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
