Engine information such as RPM temperature pressure and battery voltage are displayed as an attractive dashboard display through the web browser on the mobile device so there’s no need for a custom app. iOS and Android devices can display app data and a web browser page side by side so you can have your favourite charting app open alongside engine instrument displays.
Setup and installation is easy. Just “T” into the NMEA 2000 backbone and ENGINELink is self powered from the network. It creates a secure password protected local wifi network with up to 7 devices able to connect simultaneously. UDP and TCP/IP protocols are supported too for compatibility with 3rd party apps.
Most modern outboards and engines have an NMEA 2000 interface or the ability to add as an accessory and ENGINELink has preset dashboards for popular manufacturers including Honda Suzuki Tohatsu Mercury Yamaha Yanmar and Volvo. In addition ENGINELink has a dashboard for the new generation of electric engines that displays current consumption and battery capacity.
Either single or dual engine installations are currently supported and ENGINELink will work with any “NMEA 2000 ready” engine. If the vessel is fitted with NMEA 2000 compatible Trim Tabs or Jack Plates then the status of these performance critical accessories are also displayed on the dashboard.
Introduction
Dual Engine Setup
Electric Engine Setup
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.