Lawn Crack's new hardened steel lawnmower blade. Sharp on all 4 sides, low-lift blade designed to fit many 48-inch commercial lawn mowers. This blade is 16.5 inches long with a 0.625 inch (5/8") center hole diameter.  This is the new spec for 2025 that is 2.5 inches wide - the original was 2 inches wide.

Please make sure your OEM blade spec is 16.5 inches long with a 5/8" diameter center hole to confirm compatibility.

The main cutting edge length is 5-5/8" long - this is when the blade is 'right-side-up.'  When flipped, you should raise the deck 5/8" of an inch and the cutting edge length when up-side-down is 2-5/8".  

The sail height or lift height is 11/16" of an inch, low-lift.

Most 48" commercial mowers use 16.25 inch or 16.5 inch long blades - please contact us if you are not sure which length your mower uses.

Dimensions:

• Length: 16-1/2"
• Center hole diameter: 5/8"
• Width: 2-1/2"
• Thickness: 1/4" (0.236" Actual Dimension)

The hardened steel will keep the cutting edge sharper longer and will last longer when used in sandy soil conditions. This blade is sharp on all 4 sides. Once you notice your blades are beginning to dull, simply flip the blades over and keep mowing with a fresh cutting edge!

3 blades are required for 48" decks. This blade also fits 32" mowers, 2 blades are required for 32" decks.

Please ask us if this blade will fit your mower. It is compatible with most 32" or 48" lawn mowers made by Bad Boy, Bunton-Goodall, Encore, Gravely, Great Dane, Hustler, John Deere, Lesco, Scag, Snapper, Spartan, Toro, Windsor, Worldlawn, & Wright.

Same length and center hole diameter as these OEM part numbers:

*If your mower uses any of these part numbers, this blade is compatible with your mower.  Our list is accurate but may not be complete.  Please note our blades only have 1 hole in the center. If your mower requires outside center holes, this blade is not compatible.

• BAD BOY: 038-5350-00
• BAD BOY: 038-5000-00
• BUNTON-GOODALL: PL4205
• BUNTON-GOODALL: PL4855
• ENCORE: 483035
• ENCORE: 483049
• GRAVELY: GDU10230
• GRAVELY: 00878100
• GREAT DANE: D18086
• HUSTLER: 796623
• HUSTLER: 601123
• HUSTLER: 601014
• HUSTLER: 795757
• JOHN DEERE: AM104489
• JOHN DEERE: TCU34166
• LESCO: 21871
• LESCO: 021871
• LESCO: 050111
• SCAG: A48184
• SCAG: 48184
• SCAG: 48184HL
• SCAG: A48184HL
• SCAG: 481710
• SCAG: 482466
• SCAG: 48110
• SCAG: A48110
• SCAG: 481706
• SCAG: 482461
• SCAG: 482877
• SNAPPER/KEES: 1-7043
• SNAPPER/KEES: 7075771
• SNAPPER/KEES: 7075771BZ
• SNAPPER/KEES: 7075771BZYP
• SPARTAN: 438-0004-00
• TORO: 107-3192-03
• TORO: 107-3196-03
• TORO: 133-2137
• TORO: 107-3195-03
• TORO: 107-3196-03
• TORO: 117-7277-03
• WORLDLAWN: 4801401
• WRIGHT: 71490001
• WRIGHT: 71440002
• WRIGHT: 71440004
• WRIGHT: 71440008