Hard Antifouling
Suitable for Aluminium Hulls,Propellers and Boot Tops
A hard antifouling suitable for professional and consumer application onto vessels in fresh, brackish and salt water.
The hard scrubbable coating is suitable for burnishing to provide a smoother finish. Providing protection for up to one year, Hard Antifouling is ideal for fast powerboats
propellers, outdrives, sterngear and the waterline.
In a range of bright colours suitable for all substrates including aluminium.
Product Features and Benefits
Formulated for use on aluminium
Single season protection from fouling organisms; slime, aquatic plants and animals.
Available in bright colours
Offers an alternative solution to Trilux 33 for DIY Boat Owners
Special Features
To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide
Product and ambient temperature should be minimum 5°C and maximum 35°C.
Substrate temperature should be minimum 3°C above dew point and maximum 35°C.
Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc ~sprayed surfaces.
Can be applied direct over most types of antifoulings, provided they are in sound condition, with the exception of PTFE antifoulings.
Suitable for Aluminium Hulls,Propellers and Boot Tops
A hard antifouling suitable for professional and consumer application onto vessels in fresh, brackish and salt water.
The hard scrubbable coating is suitable for burnishing to provide a smoother finish. Providing protection for up to one year, Hard Antifouling is ideal for fast powerboats
propellers, outdrives, sterngear and the waterline.
In a range of bright colours suitable for all substrates including aluminium.
Product Features and Benefits
Formulated for use on aluminium
Single season protection from fouling organisms; slime, aquatic plants and animals.
Available in bright colours
Offers an alternative solution to Trilux 33 for DIY Boat Owners
Special Features
To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide
Product and ambient temperature should be minimum 5°C and maximum 35°C.
Substrate temperature should be minimum 3°C above dew point and maximum 35°C.
Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc ~sprayed surfaces.
Can be applied direct over most types of antifoulings, provided they are in sound condition, with the exception of PTFE antifoulings.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
