Naval Brass Cased Shaft Bearings.
A new Brass shell cutless bearing should have a clearance of 0.006" per 1" of shaft. Has a naval brass outside with a tough synthetic nitrile rubber inside.
- Shaft Diameter: 2"
- Outside Diameter: 2-5/8"
- Length: 8"
| Part Number | Shaft Diameter | Outside Diameter | Standard Length | Approximate Metal Thickness |
| 2-11101 | 3/4" | 1.1/4" | 3" | 0.11" |
| 2-11103 | 7/8" | 1.3/8" | 3.1/2" | 0.11" |
| 2-11105 | 1" | 1.1/4" | 4" | 0.06" |
| 2-11106 | 1" | 1.3/8" | 4" | 0.09" |
| 2-11107 | 1" | 1.1/2" | 4" | 0.09" |
| 2-11108 | 1" | 1.5/8" | 4" | 0.09" |
| 2-11110 | 1.1/8" | 1.1/2" | 4.1/2" | 0.06" |
| 2-11111 | 1.1/8" | 1.5/8" | 4.1/2" | 0.06" |
| 2-11112 | 1.1/8" | 1.3/4" | 4.1/2" | 0.06" |
| 2-11114 | 1.1/4" | 1.5/8" | 5" | 0.06" |
| 2-11115 | 1.1/4" | 1.3/4" | 5" | 0.09" |
| 2-11116 | 1.1/4" | 2" | 5" | 0.09" |
| 2-11118 | 1.3/8" | 1.7/8" | 5.1/2" | 0.09" |
| 2-11119 | 1.3/8" | 2" | 5.1/2" | 0.09" |
| 2-11122 | 1.1/2" | 2" | 6" | 0.09" |
| 2-11123 | 1.1/2" | 2.3/8" | 6" | 0.13" |
| 2-11124 | 1.5/8" | 2.1/8" | 6.1/2" | 0.13" |
| 2-11126 | 1.3/4" | 2.3/8" | 7" | 0.13" |
| 2-11127 | 1.3/4" | 2.5/8" | 7" | 0.13" |
| 2-11130 | 2" | 2.5/8" | 8" | 0.13" |
| 2-11131 | 2" | 2.3/4" | 8" | 0.13" |
| 2-11137 | 2.1/4" | 3" | 9" | 0.13" |
| 2-11145 | 2.1/2" | 3.1/4" | 10" | 0.16" |
| 2-11163 | 3.1/2" | 4.1/2" | 14" | 0.15" |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
