International Primocon is a tar free conventional one part primer designed for underwater substrates including timber, steel, aluminium, cast iron keels and lead keels.
The aluminium pigmented, vinyl anti corrosive primer can be used under all International antifouling or as a barrier/sealer coat over incompatible or unknown antifouling. It can be applied by brush, roller or spray and is quick drying even in poor conditions.
Primocon prevents leaching of TBT from an underlying antifouling coating, if applied at a minimum dry film thickness of 80 microns minimum 2 coats by roller and the film remains intact.
Colour: Grey
Application: Airless Spray, Brush and Roller
Finish: Matt
Substrates: Aluminium/Zinc~Galvanised Steel, Epoxy Composite/Carbon Fibre, GRP / FRP, Lead, Steel, Wood
The aluminium pigmented, vinyl anti corrosive primer can be used under all International antifouling or as a barrier/sealer coat over incompatible or unknown antifouling. It can be applied by brush, roller or spray and is quick drying even in poor conditions.
Primocon prevents leaching of TBT from an underlying antifouling coating, if applied at a minimum dry film thickness of 80 microns minimum 2 coats by roller and the film remains intact.
Colour: Grey
Application: Airless Spray, Brush and Roller
Finish: Matt
Substrates: Aluminium/Zinc~Galvanised Steel, Epoxy Composite/Carbon Fibre, GRP / FRP, Lead, Steel, Wood
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
