Designed especially for use on boats with built in sink, shower or tub.
This unit will pump all water out of the drain and into the tank. It is compact
and can be mounted either against the floor or the walls in which case the two
legs can be cut off. It has a built in automatic bilge pump that will start operating
as soon as the float switch senses water.
Also features a filter and non return valve.
The case is made from polypropylene and the lid from acrylic.
Power consumption is limited to 1.5A at 12V.
The unit has 3 inlet hoses 2 of 19mm and 1 of 30mm and 1 outlet hose with non return
valve for hose 19mm or 25mm.
Pump: 600 GPH
Size: 196mm x 210mm x 92mm
This unit will pump all water out of the drain and into the tank. It is compact
and can be mounted either against the floor or the walls in which case the two
legs can be cut off. It has a built in automatic bilge pump that will start operating
as soon as the float switch senses water.
Also features a filter and non return valve.
The case is made from polypropylene and the lid from acrylic.
Power consumption is limited to 1.5A at 12V.
The unit has 3 inlet hoses 2 of 19mm and 1 of 30mm and 1 outlet hose with non return
valve for hose 19mm or 25mm.
Pump: 600 GPH
Size: 196mm x 210mm x 92mm
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
