Front view of our Indigo Kenzie Cotton Quilt Set dressed over a plain queen bed.

BLACK EAGLE ARROWS Black Eagle Archery Black Outsert Deep Impact & X Impact

From

$6.60

Learn More

Current Stock:

Check Store Availability

Quantity

We don't have enough stock on hand.

Adding to cart… The item has been added

Added to Cart

or 4 interest-free payments of $XX.XX with

Delivery Options (Select at Checkout)

Free In-Store Pick Up

Check this location to see if this item is available today.

Set My Store Change My Store

Ship to Address

Shipping calculated at checkout*

Shipping Details

Returns & Exchanges

We’re committed to providing a positive and memorable experience with every purchase! If you’re not satisfied, we’ll do our best to make things right! Please contact our team of Sleep Stylists should you require assistance with your QE Home online order or have questions or concerns. Return Policy

Description
Sizes
Care

Quantity per pack - 12

These black anodized 7075 T6 aluminum alloy outserts have been tested and designed by experienced hunters and target archers to ensure maximum penetration and performance. The Deep Impact Outsert fully encompasses the base of the shaft just over 1 inch providing OUTSTANDING arrow strength and concentricity. With Micro-Glue channels inside the outsert to create a much better bonding surface this outsert is built to last shot after shot. If you are looking for maximum penetration and shot after shot performance then the deadly combination of the Deep Impact Outsert and shaft are sure to be a hit!

The Deep Impact Outsert Weights are a Follows:

250 Spine = 42 Grains
300 Spine = 40 Grains
350 Spine = 42 Grains
400 Spine = 42 Grains
500 Spine = 44 Grains
600 Spine = 46 Grains

The X-Impact Outsert Weights are a Follows:

250 Spine = 42 Grains
300 Spine = 40 Grains
350 Spine = 44 Grains
400 Spine = 46 Grains
500 Spine = 48 Grains

To install the outsert.

Select the right outsert for the right shaft.
Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits snug on shaft. Start slowly so you don't remove to much off the arrow.
Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended)
Again, Spin test to ensure concentricity. Rotating outsert until it spins perfect.
Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment once glue is applied.
We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
Apply a even amount of glue around the shaft to ensure the glue channels get enough glue in them to hold.
Once The outsert is glued on stand the arrow on the nock end to dry.

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.