Specifically designed for tough wire-reinforced hoses and where an extra margin of safety and reliability is required. Hi-Torque clamps out perform nut and bolt type clamps due to:
Higher sealing pressure due to more uniform tightening
Offer a larger adjustment for each size
No loose parts so quicker to fit and requires less space
Unique 'Straight Line' housing ensures that every thread in the screw is fully engaged in the band
Twice the strength of ordinary worm drive hose clips due to the high tensile banding and hardened rolled thread screw
Sold singly
Lloyds Register Type Approval for marine, offshore and industrial use. They are specifically approved for the critical application of sealing wet diesel exhaust hoses.
Material Specification
All parts: BS304 - EN1 4301
Tensile strength = 1150 N/mm sq (approximately 75 tons/in sq)
Recommended Setting Torques: 15 Nm (130 lb. in)
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
