FST240 Stump Grinder by Fecon
The Fecon Stumper 240 offers high production and excellent visibility with a 24" diameter cutting wheel. This model offers 14 teeth and a 3/4 inch thick wheel; all helping you achieve an 8" cut per pass. Spend less time doing maintenance with our direct drive system, which has no belts or pulleys, no gear boxes, and no electrical connections. We help you avoid case drains, grease fittings, and auxiliary cylinders to keep you grinding longer!
Specs
- 24" Cutting Diameter
- 8" Cut Depth per pass
- 475 lb. Weight
- Auxiliary Hydraulics
- ST: 12-25 GPM
- HD: 25-45 GPM
Features
| Features | Benefits |
| Motor | Low RPM / High Torque / High Performance |
| Plug-N-Play | No Electrical connections required / Works on any machine |
| Oversize Rakers | Limit the depth of cut / Prolong tooth life |
| Face & Edge Grinding | Large passes with the wheel face / Plunge cuts |
| Below-Grade Grinding | All Stumpers easily grind as deep as necessary below grade |
| Maximum Maneuverability | Stumpers go anywhere the carrier goes quickly and easily allowing you to grind right next to objects safely with good visibility |
| Quality Fabrication | We use high quality / premium materials & components |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
