MINI CLAMP MULTIMETER Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals Auto range simplifies operation: 0.01 - 400 Amps, 0.001 - 600 Volts Auto power-off selection - power turns off automatically after 10 minutes of non-use True RMS - required for accurate measurement of inverter output Large digital display makes reading measurements easy Data hold - press "HOLD" button during measurement to lock reading value Test leads & carry case included with meter Specification AC Voltage: 0.001 - 600 Volts AC Current: 0.01 - 400 Amperes DC Current: 0.01 - 400 Amperes DC Voltage: 0.001 - 600 Volts Resistance/Continuity Alarm: 0.1 - 40Mohms Maximum Clamp Size: 30mm (1.18") Safety Classification: 600 Volts, Category III Range: Auto Low Battery Indicator: Yes LCD Display: 33/4 digits Measurement Resolution: 4300 Counts Sampling Rate: Approximately 2 times/second Operating Temperature Range: 0-50C (32-122F) Operating Humidity: Below 80% RH (no condensation) Operating Elevation: up to 2000m above sea level