The TruDesign Aquavalve diverting valve offers versatile installation.
It is used to divert treated or untreated sewage into a holding tank or overboard.
This 2 ~way valve is made of fiberglass ~reinforced nylon plastic. It offers high strength and
stability, with very low weight. It is designed for ambient temperatures from ~40 degrees C to
+110 degrees C.
This version is for bulkhead mounting. Suitable for bulkhead thicknesses of up to 15 mm. An
additional extension pack allows installation in bulkheads of up to 37 mm. The extension is
already included in this bulkhead version.
Features:
easy identification of the set position open / closed
simple installation: directly on bulkhead or floor
stainless steel fasteners
pressure tested up to 300 psi 2000 kpa
each valve was tested for leaks on the production line
Connections: 2 x 1 1/2 inch inner thread
It is used to divert treated or untreated sewage into a holding tank or overboard.
This 2 ~way valve is made of fiberglass ~reinforced nylon plastic. It offers high strength and
stability, with very low weight. It is designed for ambient temperatures from ~40 degrees C to
+110 degrees C.
This version is for bulkhead mounting. Suitable for bulkhead thicknesses of up to 15 mm. An
additional extension pack allows installation in bulkheads of up to 37 mm. The extension is
already included in this bulkhead version.
Features:
easy identification of the set position open / closed
simple installation: directly on bulkhead or floor
stainless steel fasteners
pressure tested up to 300 psi 2000 kpa
each valve was tested for leaks on the production line
Connections: 2 x 1 1/2 inch inner thread
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
