285434

Rule 500 Fully Automatic Submersible 25SA 12v

From
$47.25
Learn More
Check Store Availability

We don't have enough stock on hand.

Adding to cart… The item has been added
Added to Cart
Rule Fully Automatic 500 Submersible
Submersible pump 12 volt DC with 750mm cable.
Connections: For 19mm 3/4in bore hose.
Dimensions: 107mm high, 64mm x 74mm.
Current Draw: 1.6amps
Fuse Size: 4 amp
Output: Up to 31 litres/minute 7 gallons/minute at 12v, without check valve. Max. recommended discharge head 2m.
Fully automated bilge pump with computerised operation.
Tough plastic housing with integral strainer.
Quick release strainer allows rapid cleaning.
Low amp draw conserves batteries.
Checks for water every 2 1/2 minutes Runs for 1/2 second
Consumes 0.20 amps per day
Built ~in Thermal Cut ~Off.
Check Valve included for Back Flow Prevention.
Vented housing to prevent air locking.
Threaded port for easier installation and maintenance.
No Need for separate float switch, third wire for manual override.
Base not interchangeable with old range but can be fitted to existing screw holes.
Packaged Dimensions: L:18.00 x H:17.00 x W:9.00cm
Actual Weight: 0.41 Kg Approx. 0.61 Kg packed

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.

Reviews