284903

Plastimo EZ Water Housing Mixer Tap, White Round Cover 67204

From
$36.50
Learn More
Check Store Availability

We don't have enough stock on hand.

Adding to cart… The item has been added
Added to Cart
A mixer tap unit from the Plastimo EZ Water range that allows the user to adjust the flow rate and water temperature of the deck shower. This model is made up of a chromed brass mixer tap within white flushmount housing with a splashproof round white cover.
Product contents:
1 x ABS ~ASA housing with splashproof cover
2 x Stainless steel screws and fixing shims
1 x Stainless steel mixing valve
3 x 20cm braided stainless steel pipes
Connection to the water supply by G 3/8 inch thread

PLEASE NOTE: The image showing the cap open shows a chrome cap ~ this model has a white cap similar to that in main image.
Mounting:
Drill a 70 mm hole. Position the housing. Ensure the housing is sealed with a silicone seal. Fix the box using the screws supplied Torx T10 to the tightening torque of 5Nm. Connect the water inlet pipes and the outlet pipe to the spray head. Tighten moderately and check for leaks.
Maintenance: Does not require special maintenance. Do not use solvents.

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.

Reviews