The most versatile Y ~Valve on the market.
The TruDesign Aquavalve is designed for the diversion and control of the flow of effluent or water.
Used in marine toilet applications the effluent can be channelled overboard or held in a holding tank for later
discharge overboard or to a shore side facility.
Features:
Clear indication of which port is in the closed position
Versatile ~ can connect 3/4inch to 11/2inch hose
Easy mounting ~ screws directly to bulkhead or floor
316 Stainless Steel fastenings
Each valve is leak pressure tested during manufacture
Design burst pressure rating of 300 PSI 2,070 kPa
User serviceable
Lockable feature ~ no ability for accidental discharge
Each valve supplied with spanner.

Note: All three ports female 1 1/2 inch BSP Parallel threads
The TruDesign Aquavalve is moulded from a glass ~reinforced nylon composite. High strength, highmodulus
glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional
stability.
Aquavalve Versatility
The TruDesign Aquavalve is the most versatile diverting valve available. With the ability to mix and match fittings,
adjust the angle of piping and flip the face plate to suit the installation.

Note: The Y valve comes standard without tails. The user is given the choice to choose the correct diameter tail to suit