MS 151 C-E Petrol Chainsaw: Lightweight back handle saw for pruning and carving
The lightest back handle saw by STIHL. Suitable for pruning, snedding, hedge-laying and cutting
smaller limbs.
This upgraded version of the MS 151 features a new 2-MIX engine that consists of a new cylinder, piston and exhaust. These changes mean there is an increase in power of the saw by up to 1.05kW and a 15% increase in torque to 1.1Nm - all while retaining the lightweight nature of the saw.
Fitted with a manual fuel pump and STIHL's ErgoStart (E) technology, this saw is easy to start-up so you can get on with the job straight away.
Available with either a 10" or 12" bar and fitted with a 1/4" PM3 saw chain for a finer, precise cut. Also excellent for intricate woodwork when combined with a carving bar.
Instruction is necessary to recognize or assess the dangers of a chainsaw. Please wear protective clothing and equipment.
If anything is unclear, we recommend to order the chainsaw via Click & Collect and pickup up the chainsaw from a STIHL servicing dealer.
Exterior design of STIHL guide bars are subject to change. Technical specifications remain the same.
Technical Data
| Bar length | 25-30 cm |
| Bar length | 10-12 " |
| Displacement | 24 cm³ |
| Power output | 1.1/1.5 kW/HP |
| Weight | 2.8 kg 1) |
| Power-to-weight ratio | 2.5 kg/kW |
| Weight | 3.12 / 3.17 kg 2) |
| Sound pressure level | 96 dB(A) 3) |
| Sound power level | 110 dB(A) 3) |
| Vibration values left/right | 4.9/4.9 m/s² 4) |
| Saw chain pitch | 1/4 " P |
| CO2 | 886 g/kWh |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
