A pure white, hollow glass bubble based, low density filler designed for filling and fairing of fibreglass.
When the filler is mixed with WEST SYSTEM epoxy at a ratio of 10 to 25 percent by weight, it creates a smooth creamy paste for filling and fairing over glass fibre repairs.
The cured epoxy filler is very easy to sand. Being white in colour the cured epoxy filler mix will be hidden easily behind paint or polyester gelcoat but must be protected by further coats of epoxy if used below the waterline.
When the filler is mixed with WEST SYSTEM epoxy at a ratio of 10 to 25 percent by weight, it creates a smooth creamy paste for filling and fairing over glass fibre repairs.
The cured epoxy filler is very easy to sand. Being white in colour the cured epoxy filler mix will be hidden easily behind paint or polyester gelcoat but must be protected by further coats of epoxy if used below the waterline.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
