International Danboline is a hard ~wearing paint designed to protect bilges, lockers and bulkheads from moisture penetration and wear and tear. The easy to clean paint is resistant to oil and fuel spillage.
Features
Finish: High sheen
Practical Coverage m²/Lt: 11.0
No. of coats: 1 ~2
Substrates: GRP, Wood*, Steel*, Aluminium* *over suitable primers
Application: Brush, roller
Thinners: No. 1
Drying times:
Theoretical coverage: 12.3m²/litre
Touch dry at 5°C: 16 hours
Touch dry at 15°C: 8 hours
Touch dry at 23°C: 6 hours
Touch dry at 35°C: 3 hours
Working time at 5°C: Minimum 36 hours / Maximum 4 days
Working time at 15°C: Minimum 24 hours / Maximum 3 days
Working time at 23°C: Minimum 16 hours / Maximum 2 days
Working time at 35°C: Minimum 4 hours / Maximum 1 day
Features
Finish: High sheen
Practical Coverage m²/Lt: 11.0
No. of coats: 1 ~2
Substrates: GRP, Wood*, Steel*, Aluminium* *over suitable primers
Application: Brush, roller
Thinners: No. 1
Drying times:
Theoretical coverage: 12.3m²/litre
Touch dry at 5°C: 16 hours
Touch dry at 15°C: 8 hours
Touch dry at 23°C: 6 hours
Touch dry at 35°C: 3 hours
Working time at 5°C: Minimum 36 hours / Maximum 4 days
Working time at 15°C: Minimum 24 hours / Maximum 3 days
Working time at 23°C: Minimum 16 hours / Maximum 2 days
Working time at 35°C: Minimum 4 hours / Maximum 1 day
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
