Aquavalve Hose Fittings
A full range of hose tail fittings of different sizes and angles are available.
Featuring male 1 1/2 inch BSP parallel threads designed for direct installation and sealing on the red gaskets
included with the Aquavalve.
Hose tail sizes are available in common hose sizes from 19 – 38mm. Bends allow tidy routing of hoses and are
supplied with a thicker seal option Blue which can be used in place of the Aquavalve’s red seals to allow
fittings to be rotated to a more suitable position if needed.
A full range of hose tail fittings of different sizes and angles are available.
Featuring male 1 1/2 inch BSP parallel threads designed for direct installation and sealing on the red gaskets
included with the Aquavalve.
Hose tail sizes are available in common hose sizes from 19 – 38mm. Bends allow tidy routing of hoses and are
supplied with a thicker seal option Blue which can be used in place of the Aquavalve’s red seals to allow
fittings to be rotated to a more suitable position if needed.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
