Product Description
Harken Double Stand-Up Toggle 32mm Car w/ Control Tangs
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Whether racing or cruising, these smooth- rolling systems pay huge dividends in sail control and are safer and faster than playing the sheet.
CB wire retaining clips and composite corner keepers keep ball bearings captive when car is off the track.
Specifications:
Length: 9 1/8 in. (231 mm)
Width: 3 11/32 in. (85 mm)
Height: 3 1/2 in. (89 mm)
Weight: 56.44 oz. (1600 g)
Mainsheet block pin Ø: 5/16 in. (8 mm)
Control block pin Ø: 1/4 in. (6 mm)
Maximum working load: 5000 lbs. (2268 kg)
Breaking load: 10000 lbs. (4536 kg)
Use with track: R32, R32HB
Minimum curved track radius: 24 ft. (7.32 m)
DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Whether racing or cruising, these smooth- rolling systems pay huge dividends in sail control and are safer and faster than playing the sheet.
CB wire retaining clips and composite corner keepers keep ball bearings captive when car is off the track.
Specifications:
DO NOT use Harken equipment for human suspension unless product is specifically certified and labeled for such use.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
