Product Highlights
Take on any task with the Z Master® 2000 zero-turn mower. Constructed for professional use with a 7 gauge steel TURBO FORCE® cutting deck for fast, clean work. Plus, with a high-back suspension comfort seat you'll enjoy the ride, too.
- TURBO FORCE® Cutting Deck - Built to last. Enjoy years of reliable performance with an upgraded 7-gauge steel, 5.5" deep deck.
- Low-Back Suspension Seat - Stay comfortable on the job with the premium low-back shock absorbing suspension seat.
- 24" Voodoo Trac™ Drive Tires - Get the ultimate in aggressive tread and styling with 24" Voodoo Trac™ Drive Tires.
- Customize your ride with optional lights, bucket holder, trimmer mount, baggers, mounts, and up to 20 attachments.
- Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
Specifications
| Anti Scalp Wheels | Standard |
|---|---|
| Blade Tip Speed | 18,500 ft/min / 5,638 m/min |
| CARB Compliant | CARB Compliant |
| Caster Tires | 13 in. x 6.5 in. - 6 in. (33 cm x 16.5 cm - 15.2 cm) Pneumatic |
| Clutch | Electromagnetic |
| Cutting Width | 60 in. / 152 cm |
| Deck Design | 5.5” (14 cm) deck depth, 7-Gauge High-Strength Steel TURBO FORCE® w/ bull-nose bumper |
| Discharge Chute | Rubber |
| Drive Tires | Voodoo Trac 24 in. x 9.5 in. - 12 in. (61 x 24.1 - 30.5 cm) |
| Engine | Vanguard 810 EFI |
| Engine Brand | Vanguard |
| Engine Displacement (cc) | 810 cc |
| Engine Horsepower | 28.0 hp |
| Foot Operated Height of Cut | Standard |
| Forward Ground/Transport Speed | Up to 10.0 mph / 16.0 kph |
| Fuel Capacity | 7 gal. / 26.5 L / 28 Qt. |
| Fuel Type | Gasoline |
| Height of Cut | 1.5 - 5.0 in. / 3.8 - 12.7 cm in 0.25 in (0.64 cm) increments |
| Hitch Bracket | Standard |
| Hour Meter | Standard Hour Meter |
| Ignition | Electric |
| Lighting | LED Headlights |
| Notes: | Hitch: Integrated Receiver Hitch - 2 in. x 2 in. 80 lbs. (36.3 kg) max tongue, 250 lbs. (113.4 kg) max tow |
| Product Type | Zero Turn Mower |
| Product Use | Commercial |
| Roll-Over Protection (ROPS) | Folding; Standard |
| Spindle Housing | 8 in / 20.3 cm Diameter Aluminum (Non Greasable) Ball Bearing, 1 in / 2.5 cm Shaft |
| Steering Controls | 1.4" (3.6 cm) Diameter Grips; Adjustable, Dampened |
| Tool Mounting Capability | Side Console / Rear Guard Ready |
| Transmission | Hydro-Gear ZT-3400 |
Disclaimer
Specifications subject to change without notice and without incurring obligation. Products depicted are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments and safety features.
*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
