Introducing the Kayuga Gen 2.0 Pilot Cut Broadheads - 6 Pack, the ultimate broadhead that ticks all the boxes. Born from a hunting camp idea, this product is strong, sharp, and accurate, ensuring a balanced and quiet performance. It's not only affordable but also boasts a wide cutting diameter and minimal surface area. The coatings keep resistance to a minimum, while the material maintains an edge and prevents rust on the cutting edge. This quality product, with its aerodynamic design, full stainless steel construction, and solid one-piece single bevel, is something you'd be proud to put your name against. With a true 46-48 Rockwell Hardness and 3:1 ratio at the front, it's the perfect choice for any hunting enthusiast. Each pack contains 6 heads, making it a great value for money.
Kayuga Gen 2.0 Pilot Cut Broadheads - 6 Pack Features:
- Strong: Built to withstand the toughest conditions and targets.
- Sharp: Single bevel design ensures a sharp edge for maximum penetration.
- Accurate: Aerodynamic design and 3:1 ratio at front for precision accuracy.
- Resistant: Coated to minimise resistance and prevent rust on cutting edge.
- Quality: Full stainless steel construction, true 46-48 Rockwell Hardness, a product you'd be proud to put your name against.
100 Grains Features:
- Aerodynamic design
- Full stainless steel construction
- 3:1 Ratio at front
- Solid one piece
- Single bevel
- True 46-48 Rockwell Hardness
- 6 heads per pack
- Main blade is 30mm or 1-3/16"
- Main blade 1.4mm thick
- Bleeder is 16mm or 5/8"
- Bleeder is 0.8mm thick
- 33 degree single bevel main blade
- head weight is based on being 2 blade with infill only, using the bleeder system will add 10-15 grains to the broadheads weight.
125 Grains Features:
- Aerodynamic design
- Full stainless steel construction
- 3:1 Ratio at front
- Solid one piece
- Single bevel
- True 46-48 Rockwell Hardness
- 6 heads per pack
- Weight is based on 2 blade design with use of infill only, bleeders add an additional 10-12 grains to this head
150 Grains Features:
- Aerodynamic design
- Full stainless steel construction
- 3:1 Ratio at front
- Solid one piece
- Single bevel
- True 46-48 Rockwell Hardness
- 6 heads per pack
- Main blade is 30mm or 1-3/16" cutting diameter
- Main blade 2.1mm thick
- Bleeder is 18.5mm or 3/4" cutting diameter
- Bleeder is 0.8mm thick
- 33 degree single bevel main blade
- head weight is based on being 2 blade with infill only, using the bleeder system will add 15-20 grains to the broadheads weight.
175 Grains Features:
- Aerodynamic design
- Full stainless steel construction
- 3:1 Ratio at front
- Solid one piece
- Single bevel
- True 46-48 Rockwell Hardness
- 6 heads per pack
- Main blade is 32mm or 1-1/4" cutting diameter
- Main blade 3.1 mm thick
- Bleeder is 18.5mm or 3/4"
- Bleeder is 0.8mm thick
- 33 degree single bevel main blade
- head weight is based on being 2 blade with infill only, using the bleeder system will add 15-20 grains to the broadheads weight.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
