Controlled charging
Every TG Charger has a microprocessor which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG Chargers as a power supply
As a result of the perfectly stabilized output voltage a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two outputs to charge
2 battery banks (24V models only) The TG Chargers feature 2 isolated outputs. The second output limited to approximately 4A and with a slightly lower output voltage is intended to top up a starter battery.
To increase battery life: temperature compensation
Every Skylla TG Charger comes with a battery temperature sensor. When connected charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
