Front view of our Indigo Kenzie Cotton Quilt Set dressed over a plain queen bed.

Seakeeper Ride Zinc Anode Kit [12833SP]

From

$20.20

Learn More

Current Stock:

Check Store Availability

Quantity

We don't have enough stock on hand.

Adding to cart… The item has been added

Added to Cart

or 4 interest-free payments of $XX.XX with

Delivery Options (Select at Checkout)

Free In-Store Pick Up

Check this location to see if this item is available today.

Set My Store Change My Store

Ship to Address

Shipping calculated at checkout*

Shipping Details

Returns & Exchanges

We’re committed to providing a positive and memorable experience with every purchase! If you’re not satisfied, we’ll do our best to make things right! Please contact our team of Sleep Stylists should you require assistance with your QE Home online order or have questions or concerns. Return Policy

Description
Sizes
Care

Zinc Anode Kit

The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.

Installation

Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
Unscrew the two (2) M4-0.7 x 12 mm bolts holding the zinc sacrificial anode.
Attach the new zinc sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
Reattach the Blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an "X" pattern.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.