Blakes SCXK11 Seacock Discharge Plates and Bolts for 1 1/2 inch Seacock
Replacement discharge mounting plate kit for the 38mm ~ 1½ inch Blakes Seacock.
The Blakes strainer mounting plate kit with nuts and bolts comprises of:
One replacement strainer plate 95mm OD, 4 square locating holes on 75mm PCD, 39mm OD centre hole
Four phosphor bronze machined bolts Bolt nominal 7mm OD, 75mm long
Four phosphor bronze nuts
Note: May not be compatible with early model Blakes Seacocks.
Replacement discharge mounting plate kit for the 38mm ~ 1½ inch Blakes Seacock.
The Blakes strainer mounting plate kit with nuts and bolts comprises of:
One replacement strainer plate 95mm OD, 4 square locating holes on 75mm PCD, 39mm OD centre hole
Four phosphor bronze machined bolts Bolt nominal 7mm OD, 75mm long
Four phosphor bronze nuts
Note: May not be compatible with early model Blakes Seacocks.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
