This product is the LCA standard Limb Adapter set. You can use this set of adapters for most split limb bows that are too far beyond parallel to press within our standard fingers. It's not a requirement to use this adapter set for all split limb bows, and it won't work with every split limb bow on the market, but the set is used most commonly with a choice few Bear, PSE, and Obsession models.
Here’s a few models out of the entire bow market that require special adapters. These are adapters that we offer for sale that are used in conjunction with our bow presses.
The bows that are exceptions are as follows.
*Limb Adapter Set
Bear Attack
Bear Carnage
Elite Ritual 31 (you have to remove the small plastic draw stop rest that sits on the limb)
PSE Omen
*Ultra Lock Adapter
2016 / 2017
Hoyt Defiant series (aluminum / carbon models)
Hoyt Hyper Edge & Hoyt Double XL
(The ULA can only be used for these specific Hoyt bows from these two years. Any other model, or brand, is not to be used inside the ULA. It can cause damage to your press, your adapter, and your bow if you use the ULA with other bow brands or models.)
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
