MORRIS MEG ANTI-FREEZE MEG (Mono-Ethylene Glycol) Anti-freeze protects engines from frost damage right down to -36C, whilst providing outstanding protection against rust and corrosion for all parts of the cooling system. Features Protects from rust or corrosion to taking place with cast iron, aluminium, copper alloys, solder or any other metals Does not form sediment, precipitate additives or form gels No adverse effects on rubber hoses or gasket materials and will not cause leaks Last for up to two years in service, when a 50% solution is maintained Does not form harmful foam inside the system Compatible with all good quality ethylene glycol antifreezes of this type Nitrite, amine and phosphate (NAP) free Includes borate and silicate Applications Suitable for most engine cooling systems found in boats, cars, vans, trucks, agricultural equipment and contractors plant. NOTE: Always check the manufacturer's handbook. Performance Exceeds the requirements of many European & International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010). APPLICATION: Recommended for all year round use, Universal Antifreeze protects all water cooled engines from frost damage down to -34?C and ice damage -50?C (at 50% of total coolant). Physical Characteristics Appearance: Blue Relative Density at 15C: 1.119 Equilibrium Reflux Boiling Point: 161C pH at 25C (50% vol): 7.8 Water Content (%): 5.0 max Reserve Alkalinity, 0.1N HCl: 20.5 2-74970 - Bulk pack of 12 x 1 Litre bottles 2-74972 - Bulk pack of 4 x 5 Litre bottles Solution Volume | Freezing Point | SG Reading 25% | -12C | 1.030 33% | - 22C | 1.045 40% | - 27C | 1.060 50% | - 36C | 1.074