Product Features
- A strong 25 HP Kohler® engine delivers reliable power to tackle your yard
- 50-in. heavy-duty fabricated AeroForce™ deck with FastAttach cutting system that has been tested and proven to deliver a best-in-class cut, meaning fewer clumps and stragglers, finer clippings and increased evenness
- Tuff Torq Hydrostatic transmission, no shifting, just push the pedal and go
Product Specifications
Engine
- Engine Brand: Kohler®
- Engine Model: 7000 HD
- Engine Model Number: KT740
- Engine Displacement: 725cc
- Engine Output: 25HP
- Starter Type: Electric
- Fuel Tank Capacity: 3.0 gal. US (11.36 L)
- Cylinders: Twin
- Engine Start: Ignition Key
- Engine Oil Capacity: 2.0 qts. US (1.89 L)
- Lubrication: Fully pressurized
- Charging System: 12 amp regulated
- Fuel Gauge: No
- Governor: Mechanical
- Choke: Choke-a-matic
- Air Filter: Single element
- Oil Filter: Yes
- Fuel Delivery: Carburetor
Battery
- Battery: 210 CCA
- Battery Type: AGM (Absorbent Glass Mat)
- Battery Voltage: 12V
Drive System
- Transmission: Tuff Torq® K58
- Forward Speed: 5.5 MPH / 8.6 km/h
- Reverse Speed: 3 MPH / 4.8 km/h
- Rear Axle: 1"
- Drive System: Hydrostatic
- Transmission Control: Foot Pedal
- Transmission Housing: Aluminum
- Rear Differential Lock: No
Cutting Deck
- Deck Cutting Width: 50 in
- Deck Wash: Yes
- Deck Material: 11-gauge steel
- Deck Engagement (PTO): Electric
- Deck Construction: Fabricated
- Blade(s): 3
- Deck Lift: Manual
- Cutting Height Range: 1" - 4"
- Anti-Scalping: 4 gauge wheels
- Deck Positions: 12
Warranty
- Warranty: 3-year unlimited hours
- Frame Warranty: 5-year limited
- Front Axle Warranty: 5-year unlimited hours
- Deck Shell Warranty: Lifetime limited
- Commercial Warranty: No
Chassis
- Frame: Robotically welded
- Turning Radius: 16"
- Bumper: Brush Guard
- Rear Tow Hitch: Yes
- Corrosion Protection: Yes
- Front Pivot Bar: Cast iron
Controls
- Cruise Control: Yes
- Brakes: Disc
Comfort
- Seat Type: 15" High-back
- Armrests: Yes
- Seat Adjustment: Lever
- Floor Mats: Rubber
Wheels
- Bearing Type: Ball Bearing
- Rear Tires: 22"x9.5"-12"
- Front Tires: 16"x 6.5"-8"
- Tire Tread: Turf Master
Additional Specifications
- Mulch Kit: Available separately
- Headlight(s): Dual LED
- Cup Holder: Yes
- Operator Presence System: Yes
- Model Number: 14AQA6TMA10
Specifications
- Series: XT2® Enduro Series™
Disclaimer
- Specifications Disclaimer: Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
